Interpower FacebookInterpower LinkedIn Interpower Twitterrss-feed
PHONE: U.S. (641) 673-5000 | Toll-Free: (800) 662-2290 | UK +44 (0)1908 295300 | Freephone: 00800 5566 5566
  1. Interpower
  2.  / 
  3. Products
  4.  / 
  5. International Power Source

International Power Source

The Interpower® International Power Source (IPS) provides a low-cost, convenient source of AC power at various operating voltages and frequencies found around the world (typically 110-240VAC/50-60Hz) which is important for testing any products that are exported. Output power is delivered through one of two ranges: Low range (10-138VAC) through a standard NEMA 5-20 socket and High range (10-276VAC) through any of the six standard international sockets so that products can be conveniently powered during development or just prior to shipment.

The Interpower International Power Source can be tested on site using the voltage and frequency of where the product will be exported to to ensure it will function properly. Our International Power Source is easy to operate with various electrical outlets from around the world and a display that will show the amps, volts and frequency to match the country where the product will be used.

P/N: 85522211 – Output 2200VA – 1 RS232 and 1 USB

P/N: 85522201 – Output 2200VA – No Communication Ports

P/N: 85521711 – Output 1725VA – 1 RS232 and 1 USB

P/N: 85521701 - Output 1725VA – No Communication Ports

IPS Interface Software

P/N: 85501010 – IPS Interface Software

The IPS Interface Software is an optional, computer graphical user interface software which is available for the creation of AC power test routines, graphic AC power tests, and fast testing at AC world voltages and frequencies

Demo Software

To demo this software, click the links below to download the 32bit or 64bit versions.

IPS Interface Software Demo (32bit)

IPS Interface Software Demo (64bit)

To purchase a fully functional software, contact Customer Service. This product is to be used with Interpower IPS part numbers 85522211 and 85521711. Customers will receive a License Key with the purchase of the software ($500). One license key is specific to one IPS unit.

Rental units also available from our U.S. location. Contact Customer Service for more information.

To hear more benefits of our International Power Source see our International Power Source Benefits video.

Other Information

The Interpower International Power Source is ETL Certified, SEMKO Certified, and has a CB Certificate.


International Power Source Manual Download

Optional Input Cord Sets

For a list of IPS optional input cord sets click here. Per IEC 60799, countries with standard plugs that have an amperage rating lower than the connector cannot be used. These countries will have to use the IEC 60309 cord set.

LabVIEWTM drivers are available for part numbers 85521711 and 85522211. The LabVIEWTM drivers can be downloaded from National Instruments’ website: